Functions: Measure soil MOISTURE, PH and LIGHT levels
Easy to use: No Battery needed, Plug and read
Scientifically accurate: keep your plants in a healthy range
How to use: Simply insert the probes into the soil, and you'll get your reading
Ideal tool for indoor/outdoor plants, help your plants grow healthy and strong
pH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)
Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)
Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH)
Size: 6 x 28 x 5cm [2.36 x 11 x 2"]
Probe length: 18cm [7.1"]
Copper probe diameter: 4.8mm
Alu probe diameter: 5.1mm
Distance between probes: 1.2cm
Package weight: 107g
Step 1: Switch moisture/pH/light position
Step 2: Stick the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: After 10 minutes, Note moisture/pH/light level in the dial
Step 5: Remove probe from soil and wipe clean after each use
1. Do not touch the stone or hard rock soil, if the soil is too hard and dry, easy to damage the probes.
Copper and Aluminum itself does not belong to the hard material, so if the soil is too dry and hard to insert, you can use auxiliary agricultural tools drill hole and then insert.
2. Design for testing soil ONLY.
Do not be used to test pure water or other liquid, electrolytic response index will be affected, can only be used to measure the soil.
3. After using, need to clean and wipe the probes. Don't be inserted in the soil for a long time while using.
1 x 3 in 1 Soil Tester
If you find what you believe is defect, please contact Covery Support.
Measures moisture content of soil. Lets you know when to water
Helps you determine if plant is getting adequate light
Helps you control PH level in soil
No batteries needed
Indoor or outdoor use