iPower 3 in 1 Soil Meter:
This Soil Meter help you know your soil clearer and care your plants more rational. Ideal Tool for Plant Tester: Compact and portable design for indoor/outdoor use.
1.Let you know when to water. Dry and needs water or wet and could use a day to dry out. You will never over/under water your plants again.
2.Help you to control PH level in soil, acidic or alkaline is suitable for your plants You will never plant your lovely flowers into high-acid or Extreme alkalinity soil.
3.Help you to know if plant getting adequate light.
4.If the Soil Meter's Pointer does not rotate, maybe the plants are very dry! It means that your plants need to water.
Measure soil MOISTURE, PH and LIGHT levels
Easy to use:
No Battery needed, Plug and read
keep your plants in a healthy range
How to use:
Simply insert the probes into the soil, and you'll get your reading.
Ideal tool for indoor/outdoor plants, help your plants grow healthy and strong.
pH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)
Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)
Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HIGH)
Size: 6 x 28 x 5cm [2.36 x 11 x 2"]
Probe length: 18cm [7.1"]
Copper probe diameter: 4.8mm
Alu probe diameter: 5.1mm
Distance between probes: 1.2cm
Package Included: 1 x 3 in 1 Soil Tester with instruction guide
Package weight: 107g
Step 1: Switch moisture/pH/light position
Step 2: Stick the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: After 10 minutes, Note moisture/pH/light level in the dial
Step 5: Remove probe from soil and wipe clean after each use
1. Do not touch the stone or hard rock soil, if the soil is too hard and dry, easy to damage the probes.Copper and Aluminum itself does not belong to the hard material, so if the soil is too dry and hard to insert, you can use auxiliary agricultural tools drill hole and then insert.
2. Design for testing soil ONLY.Cannot be used to test pure water or other liquid, electrolytic response index will be affected, can only be used to measure the soil.
3. Don't be inserted in the soil for a long time while using. Use cloth wipe the probe so that keep clean and dry and then use.
4. Don't touch fire and stay away from children.
🌸🌸WARRANTY - 12 months since the date of purchase, covering all quality-related issues with REFUND OR REPLACEMENT
????FUNCTIONS - 1,Measures moisture content of soil to lets you know when to water 2, Helps you determine if plant is getting adequate light 3, Helps you control PH level in soil, acidic or alkaline is suitable for your plants, You will never plant your lovely flowers into high-acid or Extreme alkalinity soil
🍅🍅NO BATTERY or SOLAR POWER - No batteries needed, no solar power needed. Just simply insert the meter in the soil area and wait for 10 mins
💁💁TIPS - 1. Watering the soil before testing the PH, or the pointer will not response in dry soil 2. Most of plants cannot survive in soil whose PH value higher than 8, and that is the reason that the meter highest PH range is 8 3. Tester should be kept in the soil for 10 minutes or more to make sure you get a stable and accurate reading
🚪 🚪 INDOOR & OUTDOOR USE - Design to be lightweight and portable, easy to carry around for outdoor use, ideal soil test tool kit for home plants, garden, lawn and farm, but do not use it to test any liquids